This machine is suitable for finishing the hard tooth surface of orthogonal bevel gear and hypoid gear pair.
This machine not only can lapping teeth, but also can pair check, practical. Max check gear 200mm
Working principle of machine tool
This machine makes use of the relative slip between the tooth surfaces during the meshing process of the workpiece (forward and reverse running), and then gives the follower wheel an appropriate braking moment and continuously injects grinding fluid into the tooth surface to improve the quality of the tooth surface. Reduce its working vibration and noise, improve its surface roughness, working stability and service life.
The three axes are driven by servo motor, and the clearance set by the gear pair is automatically withdrawn, and the error is within 0.01mm.
Three-axis linkage, gear pair mounting distance (size wheel) and offset distance uninterrupted movement, change the relative meshing position of gear, gear pair relative slip, achieve tooth lapping.
Machine tool adjustment
By using the method of finding points, it is necessary to adjust the lapping position to the desired position on the premise that the size ends of the front and back surfaces of the gear pair are guaranteed to have equal clearance.
Automatic circular gear lapping after adjustment of machine tool
Active follower has the function of automatic dry shedding
YB2550研齿机
